Termostatul de cameră fără fir COMPUTHERM Q5RF , multi-zonă este potrivit pentru controlul marii majorități a cazanelor și aparatelor de aer condiționat.
Poate fi conectat cu ușurință la orice cazan pe gaz sau aparat de aer condiționat cu conectare termostat de cameră cu două fire, indiferent dacă are circuit de control de 24 V sau 230 V.
Pachetul de bază al dispozitivului include două termostate Q5 RF TX și un receptor radio Q5 RF. Termostate COMPUTHERM Q5RF (TX) suplimentare sunt disponibile separat pana la maxim doua, patru pentru un receptor.
Termostatele COMPUTHERM Q5RF pot comanda cu până la mai multe prize wireless Computherm Q1RX în același timp cu receptorul Q5 RF TX, astfel încât mai multe dispozitive separate să poată fi controlate în același timp prin comanda radio fara fir (de ex. deschiderea unei zone controlate de o pompa sau actuatoare înacelasi timp cu pornirea unui cazan). Receptorul primește semnalele de comutare de la termostate, comandă centrala și comandă deschiderea/închiderea robinetilor de separare , actuatoarelor sau a pompelor de recirculare zonei de încălzire (max. 4 zone) pentru termostate.
Fiecare zonă poate fi operată separat sau chiar simultan. Acest lucru face posibil să încălziți întotdeauna doar încăperile de care aveți nevoie.
Termostatele sunt portabile în raza de acțiune radio maxim 30 m in cladiri. Conexiunea la receptorul situat la centrala este asigurata printr-o conexiune wireless (frecventa radio), deci nu este nevoie sa instalati un fir intre termostate si centrala. Unitățile sunt coordonate din fabrică și au propriul cod de securitate, care garantează funcționarea în siguranță a dispozitivului, reacordarea termostatului cu zona lui din receptor se poate face in orice moment prin respectarea instructiunilor din manual.
Îl recomandăm pentru locurile în care nu este necesară programabilitate, dar sistemul de încălzire trebuie să fie controlat independent pe zone, iar măsurarea exactă a temperaturii și setarea temperaturii, portabilitatea și acuratețea comutării sunt importante.
Date tehnice termostat (emitator):
•Interval de masurare temperatura: 3-45 ºC (pasi de 0,1 ºC)
•Interval de reglare temperatura: 5-40 ºC (pasi de 0,5 ºC)
•Precizia de masurare temperatura: ±0,5 °C
•Sensibilitati de comutare: ±0,1 °C; ±0,2 °C
•Interval de calibrare temperatura: cca. ±4 °C
•Temperatura de depozitare: -10 °C … +40 °C
•Tensiunea de alimentare: 2 x 1,5 V baterii alcaline LR6 (AA) OBLIGATORIU!
•Putere absorbita: 1,5 mW
•Durata de viata a bateriilor: cca. 1 an ( se recomanda schimbarea lor la inceputul sezonului rece)
•Protectie: IP30
•Frecventa de functionare: 868,35 MHz
•Raza de actiune: cca. 50 m in teren deschis
•Raza de actiune: cca. 30 m in cladiri
•Dimensiuni: 110 x 80 x 23 mm (fara suport)
•Masa termostatului fara baterii: 80 g
•Tip senzor de temperatura: NTC 3435 K 10 kΩ ±1% la 25 °C
•Umiditate de functionare: 5 % — 90 % fara condens
Date tehnice ale receptorului:
•Tensiunea de alimentare: 230 V AC, 50 Hz
•Puterea absorbita in stare de veghe: 0,15 W
•Tens. max. la releul de com. cazan: max. 30 V DC / 250 V AC
•Curent maxim de comutare cazan: 8 A (2 A inductiv)
•Tensiune max. la iesiri zone: 230 V AC, 50 Hz
•Curent max. la iesiri zone: 2 A (0,5 A inductiv)
•Timp de intarziere activata la comanda de pornire a termostatelor: 4 minute
•Timp de intarziere activata la comanda de oprire a termostatelor: 6 minute
•Protectie: IP30
•Masa: 210 g
•Dimensiuni: 130 x 90 x 32 mm
•Temperatura de depozitare: -10 °C … +40 °C
•Umiditate de functionare: 5 % — 90 % fara condens
Greutatea totala a aparatelor: cca. 470 g (2 termostate + 2 suporturi + 1 receptor)
COMPUTHERM Q5RF
Multizónás, vezeték nélküli (rádiófrekvenciás), digitális szobatermosztát
A COMPUTHERM Q5RF típusú kapcsoló üzemű, multizónás, vezeték nélküli szobatermosztát a Magyarországon forgalomban lévő kazánok és klímaberendezések túlnyomó többségének szabályozására alkalmas. Egyszerűen csatlakoztatható bármely, kétvezetékes szobatermosztát csatlakozási ponttal rendelkező gázkazánhoz vagy klímaberendezéshez, függetlenül attól, hogy az 24 V-os vagy 230 V-os vezérlőáramkörrel rendelkezik.
A készülék alapcsomagja két termosztátot és egy vevőegységet tartalmaz. Igény esetén további két COMPUTHERM Q5RF (TX) és/vagy COMPUTHERM Q8RF (TX) termosztáttal is bővíthető. A COMPUTHERM Q5RF zónáival összehangolt termosztátok egyidőben összehangolhatók akár több COMPUTHERM Q1RX vezeték nélküli dugaljjal, így egyszerre több különálló készülék vezérlése is megvalósítható (pl.: kazán indítása mellett szivattyú indítása). A vevőegység fogadja a termosztátok kapcsolójeleit, vezérli a kazánt és parancsot ad a termosztátokhoz tartozó fűtési zónaszelepek (max. 4 zóna) nyitására/zárására. Az egyes zónák külön-külön, vagy akár egyszerre is üzemeltethetők. Ez lehetőséget biztosít arra, hogy mindig csak azok a helyiségek legyenek fűtve, melyekre éppen szükség van.
A termosztátok a hatótávolságon belül szabadon hordozható. A kapcsolatot a kazánnál elhelyezett vevőegységgel vezeték nélküli (rádiófrekvenciás) összeköttetés biztosítja, így a termosztátok és a kazán között nincs szükség vezeték kiépítésére. Az egységek gyárilag összehangolt és saját biztonsági kóddal rendelkeznek, mely garantálja a készülék biztonságos működését.
Olyan helyre ajánljuk, ahol nincs szükség programozhatóságra, de szükség van a fűtési rendszer zónákra bontására, továbbá fontos a pontos hőmérséklet-mérés és hőfokbeállítás, a hordozhatóság, valamint a kapcsolási pontosság.
Fontosabb funkciók:
•Több zónás fűtési rendszer vezérlése
•A termosztátok a hatótávolságon belül szabadon hordozhatók
•Pontos hőmérséklet-mérés
•Komfort és takarék hőmérséklet közötti egyszerű váltás
•Kiválasztható kapcsolási érzékenység
•Belső hőmérő kalibrálása
•Hűtés és fűtés üzemmódok közötti egyszerű váltás
Műszaki adatok:
A termosztátok (adók) legfontosabb műszaki adatai:
•Beállítható hőmérséklet tartomány: 5 – 40 °C (0,5 °C-os lépésekben)
•Hőmérséklet mérési tartomány: 3 – 45 °C (0,1 °C-os lépésekben)
•Hőmérséklet mérési pontosság: ±0,5 °C
•Hőmérséklet kalibrálási tartomány: kb. 3 °C
•Választható kapcsolási érzékenység: ±0,1 °C; ±0,2 °C
•Telepfeszültség: 2 x 1,5 V AA méretű ALKÁLI ceruzaelem (LR6)
•Működési frekvencia: 868,35 MHz
•Hatótávolság: kb. 50 m nyílt terepen
A vevőegység legfontosabb műszaki adatai:
•Tápfeszültség: 230 V AC, 50 Hz
•Kazánvezérlő relével kapcsolható feszültség: max. 30 V DC / 250 V AC
•Kazánvezérlő relével kapcsolható áramerősség: 8 A (2 A induktív terhelés)
•Zónakimenetek feszültsége: 230 V AC, 50 Hz
•Zónakimenetek terhelhetősége: 2 A (0,5 A induktív terhelés)
•Termosztátok bekapcsoló jelére aktiválható késleltetés ideje: 4 perc
•Termosztátok kikapcsoló jelére aktiválható késleltetés ideje: 6 perc
COMPUTHERM Q5RF
Multi-zone, wireless (radio-frequency) digital room thermostat
The basic package of the device includes two thermostats and a receiver unit. If required, the equipment can be extended by two additional COMPUTHERM Q5RF (TX) and/or COMPUTHERM Q8RF (TX) thermostats. It is possible to tune both a thermostat and a COMPUTHERM Q1RX wireless socket to zone 1 of the COMPUTHERM Q5RF, thus making it possible to control two different devices at the same time (e.g. starting both the boiler and a circulation pump).
The receiver unit receives switching signals from the thermostats, controls the boiler and gives commands to open/close the heating zone valves (max. 4 zones) associated with the thermostats. The zones can operate independently from each other or, in case of need, all zones can operate at the same time. This way only those rooms are heated at a given time, whose heating is required.
The thermostats enable you to set an economy and a comfort temperature, to calibrate the thermometer, to select the switching sensitivity and to switch between the heating and cooling mode.
The thermostats can be freely moved within the transmission distance, there is a wireless (radio-frequency) connection between the thermostats and the boiler. The trouble-free operation is ensured by its own security code.
We recommend using it in places where programmability is not required, but dividing the heating system into zones, portability, accurate temperature measurement, accurate temperature setting and switching sensitivity is important.
The most important technical data of the thermostats (transmitters):
•Adjustable temperature range: 5 to 40 °C (in 0.5 °C increments)
•Temperature measurement range: 3 to 45 °C (in 0.1 °C increments)
•Temperature measurement accuracy: ±0.5 °C
•Thermometer calibration range: approx. 3 °C
•Selectable switching sensitivity: ±0.1 °C; ±0.2 °C
•Battery voltage: 2 x 1.5 V AA ALKALINE batteries (LR6 type)
•Operating frequency: 868.35 MHz
•Transmission distance: approx. 50 m in an open terrain
The most important technical data of the receiver unit:
•Supply voltage: 230 V AC, 50 Hz
•Voltage of the zone outputs: 230 V AC, 50 Hz
•Loadability of the zone outputs: 1 A (0.5 A inductive load)
•Switchable voltage of the relay controlling the boiler: 24 V AC / DC … 250 V AC, 50 Hz
•Loadability of the relay controlling the boiler: 6 A (1 A inductive load)